Released January, 2006
The Pros:Finish is smooth, uniform and rich looking without losing the wood grain texture. Enough power output to fill most rooms with sound. Setup is very easy, binding posts work with standard connection methods.
The Cons:Heavy units, will need an extra pair of hands or a dolly to move it around.
The Klipsch RF-82 is a high-performance floorstanding loudspeaker that falls in the middle of the Reference Series RF speakers offered by Klipsch. The key feature of the RF series is the exclusive, critically acclaimed Tractrix horn.
Loading latest prices from ProductWiki...
This technology has been refined for the RF-82 to include an improved throat geometry for more genuine, lifelike sound. Behind the horn is a 1" titanium tweeter with a large ceramic motor to give precise and clear sound. Below the horn there are dual 8" Cerametallic woofers with inverted copper dust caps. These woofers have a very high stiffness-to-mass ratio and feature superb damping. The cabinet is designed with internal crossbracing to minimize unwanted vibrations and dual rear-firing ports eliminate turbulant noise. There is also incresed baffle ribbing around the horn mouth for improved acoustics. The Klipsch RF-82 are sold by the pair, and are available in a black woodgrain vinyl finish with magnetically attached speaker grills.
- Frequency response: 33Hz-23kHz +/-3dB
- Power handling: 150W RMS / 600W Peak
- Sensitivity: 98dB @ 2.83V / 1m
- Nominal impedance: 8 ohms compatible
- High freq crossover: 2000Hz
- High frequency drivers: 1" (2.54cm) Titanium diaphragm compression driver mated to 90x60 square Tractrix Horn
- Low frequency drivers: Dual 8" (20.3cm) Cerametallic cone woofers
- Enclosure type: Bass-reflex via dual rear-firing ports
- Height: 43.6" (110.7cm) (w/feet)
- Width: 9.5" (24.1cm)
- Depth: 16.25" (41.3cm)
- Weight: 66lbs (30kg)
- Finishes: Black Ash woodgrain vinyl
User Reviews (1)
finish is smooth, uniform and rich looking without losing the wood grain texture
enough power output to fill most rooms with sound
setup is very easy, binding posts work with standard connection methods
enough bass support that many will feel an extra sub isn't needed
definition of the sound is clear and precise, makes the most of the signal sent to it
no distortion at all, even at higher volumes
heavy units, will need an extra pair of hands or a dolly to move it around
You may also like...